Dimplex Opti-Myst® Pro 1500 - 65” One Or Two Sided Vapor Fireplace With Heater (GBF1500-PRO)
This realistic water vapor electric firebox can be installed as a single sided unit or converted to a see-through design by removing the included backer panel.
The stunning appearance and majestic design of the Opti-myst® Pro is the perfect fit for custom applications. Tailor your wall treatment around the Opti-myst® Pro for a truly built-in look.
Revolutionary ultrasonic technology is used to create the flame and smoke effect of the Dimplex® Opti-myst®. As the mist rises up the light reflects against the water molecules creating a convincing illusion of flames and smoke. The result is an appearance so authentic it will be mistaken for a true wood-burning fire.
Key Features and Benefits
- Customizable Design
- Single or Double Sided Installation
- Frame, Wire and Finish: Basic installation requires fewer tradespeople, no gas lines, venting or chimney.
- Opti-myst fireplace technology: Incredibly, life-like, patented 3-dimensional flame effect. Creates an illusion of fire and smoke. The world’s most authentic fireplace experience.
- Includes a powerful fan-forced heater designed to heat a room up to 400 square feet, providing supplemental heat when required.
- Flame operates with or without the heat
- Note: heater cannot be used without the flame
- Crackling sound: the crackle of a real wood fire - adjustable with remote control.
- Fill the water tank with tap water and enjoy
- Easy-fill water tank: Offers up to 8 hours of continuous operation before refilling is required.
- Provides continuous water supply complete with overflow safety sensor, automatically shutting off water to prevent leaks.
- Designed to be direct-wired to a 120 volt circuit for a seamless look.
- Includes flat plate that supports custom media (not included). Optional inner glow logs also available.
- Includes a convenient remote control that operates heat (full-heat and half-heat) and smoke effect on/off.
- Customizable Flame Look: Includes spacers and slots for customizable flame width and pattern.
- Adjustable Flame Intensity: Control the desired volume
of flame.
- Front glass panel included. Rear glass panel is optional (select an option to add rear glass panel above "Add to Cart" button)
- The green alternative. No harmful particulates or emissions and 100% efficient.
- Completely safe, with no flame heat or emissions and a glass front that remains cool to the touch.
- Energy Efficient: Uses low-energy LED lights for low-cost operation.
- Economical - Fueled by water - costs only pennies per hour
Product Manuals
Warranty
Product Q&A
How often must I top up the water in my Optimyst fire?
When run constantly, the Optimyst tank will run for approximately 8-10 hours.
Can I use scented water in my Optimyst fire?
No. We do not recommend using scented waters or oils in your Optimyst fire.
How do I clean my Optimyst fire?
- First clean out the sump. Access the sump by removing the fuel bed, and water bottle.
- Using the two retaining clips either-side, unclip and remove the mist nozzle. Unplug the transducer from the power jack and lift out the transducer.
- Lift out the sump tank being careful not to spill any residual water. At a sink rinse out the sump tank with tap water, using a dry cloth or paper towel to wipe clean and dry
- Replace the sump into your Dimplex Optimyst using the guiding slot on the side of the sump into the casing.
- Replace the transducer, locating it into its recess on the bottom of the sump using the small tab to help properly orientate the transducer. Plug the transducer cable into the power jack, ensuring that the cable is route through the guidance slot on the side of the sump tank.
- Secure the mist nozzle back in place with the red retaining clips, replacing the water bottle and fuel bed.
- While removed, refill the water bottle unscrewing the screwtop over a sink refill the water bottle. It is important that filtered water is used to help avoid limescale build up within your Dimplex Optimyst.
- Replace the screw top ensuring a water tight seal, but being careful not to over tighten.Replace the water bottle and fuel bed and turn on your Optimyst.Can I paint my Optimyst fire?
No. We do not recommend the painting of any of our products.
Can I use an extension lead with my Optimyst fire?
No. We do not recommend the use of an extension lead with any of our products.
How long can I leave water to stand in my Optimyst fire?
We do not advise leaving water to stand in the Optimyst tank for more than two weeks.
What water can I use in my Optimyst fire?
Use filtered water whenever possible. Don’t use de-ionised water. The auto shut off requires the minerals in the water to detect water level in the sump.
What is the power consumption of an Optimyst when the fire is only on flame effect?
An Optimyst fire uses 212 watts when operating in flame-only mode.
Will my Optimyst add to the humidity of the room?
An Optimyst fire uses 212 watts when operating in flame-only mode.
What lamp does the Optimyst use?
An Optimyst fire uses 212 watts when operating in flame-only mode.
Is the Optimyst easy to clean?
Yes – the sump unit, nozzle and water bottle can be cleaned with washing up liquid or even go in the dishwasher.
How often should I clean my Optimyst fire?
It is important to maintain your Dimplex Optimyst fire. Cleaning every two weeks will help ensure that it runs as it should and provide you with a realistic and comfortable fireplace.
Manufacturer Warranty applies to purchases of any product at Ambient Home
